Powertrain Drivetrain Mount Neutralizing

For information on Ford Color Coded Illustrations, refer to OEM COLOR CODING

NOTE: Refer to the appropriate service information and procedure for special instructions on loosening and tightening mount fasteners.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking And Lifting .
Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
Lower the vehicle.
NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

Start the vehicle and move it in forward 0.6-1.2 m (2-4 ft). Then move the vehicle in reverse the same distance.
Raise and support the vehicle.
Tighten the powertrain/drivetrain mount fasteners.
Lower the vehicle.
Test the system for normal operation.