LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> Taurus SHO >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (EPAS Guided Routine) >> Pinpoint Tests >> Pinpoint Tests BF: PSCM DTC P160C Control Module Software Performance >> Pinpoint Tests Purpose
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Tests Purpose

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 Ford Expedition, 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, and 2018 Ford Transit-250. However, it is still accessible from the selected car via links, so may be relevant.

To verify PSCM DTC P160C is present and provide diagnostics if DTC P160C is currently active in the PSCM.

  1. BF1: VERIFY THE PSCM DTC 
    • Ignition ON, engine OFF.
    • Clear the PSCM DTCs.
    • Ignition OFF.
    • Wait at least 90 seconds for the modules to completely shut off.
    • Ignition ON, engine OFF.
    • Carry out the PSCM self-test.
    • Is DTC P160C present and active in the PSCM? 
    Yes No
    INSTALL a new EPAS gear.
    REFER to Power Steering article
    ORDER a replacement EPAS gear and INCLUDE the RVC on the form.
    If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form.
    If the PSCM does not list DTC P160C, DISCONTINUE this test and REFER to the DTC Index  for direction.