Steering Wheel Switch Function

Pressing and releasing the ON/OFF switch turns the cruise control system on. Pressing up (SET+) or down (SET-) on the SET switch while the vehicle is traveling accelerates or decelerates the vehicle to the desired speed and maintains that speed.

Pressing the SET switch up or down while in the active mode increases or decreases the maintained vehicle speed by 2 km/h (1 mph) per press. If the respective switch is pressed and held, the vehicle speed continues to accelerate or decelerate until the switch is released.

While the cruise control system is active, applying the brake pedal or pressing the CAN/RES switch puts the cruise control system into standby mode. Pressing the CAN/RES switch when the cruise control system is in standby mode causes the vehicle to accelerate to the last set speed. Resume does not function if the ON/OFF switch is pressed, the ignition is cycled OFF, or if the current vehicle speed is below the minimum operational speed.

Pressing and releasing the ON/OFF switch while the cruise control is active, or the ignition is cycled OFF, turns the cruise control system off.