Section 214 (Starting System): Specifications
WARNING: This page is about a different car, the 2018 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
|---|---|
| Normal engine cranking speed | 200-250 rpm |
| Starting circuit maximum voltage drop (Engine at normal operating temperature) | 0.5 volt |
| Starter motor maximum load current draw | 800 amps |
| Starter motor no-load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-190 amps |
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Starter motor bolt | 48 | 35 | -- |
| Starter motor solenoid battery cable nut | 12 | -- | 106 |
| Starter motor solenoid wire nut | 6 | -- | 53 |
| Starter motor stud bolt | 48 | 35 | -- |
| Transmission manual control lever nut | 18 | -- | 159 |