LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2019 >> Fusion Energi Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (Abs Guided Routine) >> DTC/Symptom Selection >> DTC Index >> SCCM - Steering Column Control Module >> DTC C1B00: Steering Angle Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC C1B00: Steering Angle Sensor

WARNING: This page is about a different car, the 2020 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.
Failure Action
49 INSTALL a new SCCM.
61 INSTALL a new SCCM.
62 INSTALL a new SCCM.
64 This DTC sets if the steering sensor angle message indicates a turning velocity greater than 3, 000 degrees per second or a turning velocity acceleration greater than 40, 000 degrees per second. Using a diagnostic scan tool, CLEAR the DTCs. CYCLE the ignition from ON to OFF and back to ON. DRIVE the vehicle and make at lest 1 left turn and 1 right turn. RETRIEVE the SCCM DTCs. If the DTC returns, INSTALL a new SCCM.
81 INSTALL a new SCCM.
85 SET the front wheels to the straight-ahead position. CARRY OUT the Clockspring Adjustment General Procedure, REFER to the Supplemental Restraint System article. CLEAR the SCCM DTCs. CYCLE the ignition from ON to OFF and back to ON> DRIVE the vehicle and carry out at least 1 left turn and 1 right turn. RETRIEVE the SCCM DTCs. If the DTC returns, INSTALL a new SCCM.
92 INSTALL a new SCCM.
96 INSTALL a new SCCM.
scientia non olet · About LEMON Manuals