| U0104:00 |
Lost Communication With Cruise Control Module: No Sub Type Information |
GO to Pinpoint Test D |
| U0146:00 |
Lost Communication With Gateway "A": No Sub Type Information |
GO to Pinpoint Test E |
| U0405:68 |
Invalid Data Received From Cruise Control Module: Event Information |
RETRIEVE and FOLLOW non-network Diagnostic Trouble Codes (DTCs) from the CCM. REFER to: Cruise Control
If no Diagnostic Trouble Codes (DTCs) are present in the CCM, DIAGNOSE the observable symptom. |
| U0447:68 |
Invalid Data Received From Gateway "A": Event Information |
RETRIEVE and FOLLOW non-network Diagnostic Trouble Codes (DTCs) from the GWM. REFER to: Communications Network
.(418-00 Module Communications Network, Diagnosis and Testing). If no Diagnostic Trouble Codes (DTCs) are present in the GWM, DIAGNOSE the observable symptom. |
| U210A:16 |
Temperature Sensor: Circuit Voltage Below Threshold |
GO to Pinpoint Test G |
| U210A:17 |
Temperature Sensor: Circuit Voltage Above Threshold |
GO to Pinpoint Test G |
| U3000:41 |
Control Module: General Checksum Failure |
CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC U3000:41 is retrieved again, INSTALL a new HUD module. REFER to: Head Up Display (HUD) Module
. |
| U3003:16 |
Battery Voltage: Circuit Voltage Below Threshold |
GO to Pinpoint Test H |
| U3003:1C |
Battery Voltage: Circuit Voltage Out of Range |
GO to Pinpoint Test I |