| Blind Spot Information System (BLIS®)/Cross Traffic Alert (CTA) enable command |
IPC |
Used to enable/disable the Blind Spot Information System (BLIS®) or Cross Traffic Alert (CTA) based on driver input. |
| Ignition key type |
BCM |
Used to disable the ability to turn OFF the Blind Spot Information System (BLIS®) and Cross Traffic Alert (CTA) when a MyKey restricted key is in use. |
| Gear lever position (automatic transmission vehicles only) |
PCM |
Used to turn the Blind Spot Information System (BLIS®) and Cross Traffic Alert (CTA) system on and off depending the gear lever position. |
| Reverse gear (manual transmission vehicles only) |
PCM |
Used to turn the Cross Traffic Alert (CTA) system on and off when the transmission is shifted in to and out of REVERSE (R). |
| Vehicle speed |
PCM |
Used to activate the Blind Spot Information System (BLIS®) after an ignition cycle and deactivate the Cross Traffic Alert (CTA) system when the vehicle speed exceeds preset thresholds. |
| Wiper status |
SCCM |
Used to determine ambient weather conditions for correct system operation. |
| Turn signal status |
SCCM |
Used to generate the secondary alert when a turn signal is activated. |
| VIN information |
BCM |
Contains VIN information. |