Possible Causes
- Fuse
- Wiring, terminals or connectors
- ABS module
NOTE:
Diagnostics in the appropriate Service Information MUST BE CARRIED OUT before continuing with this pinpoint test.
- Has the appropriate pinpoint test in the Service Information been carried out for the no communication concern?
| Yes | No |
|---|---|
| INSTALL a new ABS module. CHECK OASIS for any service articles: TSB, GSB, SSM or FSA. If a service article exists for this concern, DISCONTINUE this test and FOLLOW the service article instructions. If no service articles address this concern, INSTALL a new ABS module. REFER to the appropriate service information. |
REFER to appropriate service information and CARRY OUT the ABS module does not respond to the diagnostic scan tool pinpoint test. |