The Line Lock feature cannot be initialized

Possible Source	Action
DTCs present in the ABS module, PCM or PSCM Vehicle is on an incline Engine is not running Selectable driving mode is set to Snow-Wet Vehicle is traveling faster than 40-48 km/h (25-30 mph)	Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module, PCM and PSCM DTCs REPAIR and INSTALL the road wheel and ATTEMPT to engage the Line Lock feature CLOSE the open door and ATTEMPT to engage the Line Lock feature The transmission must be in a forward gear for the Line Lock feature to engage. PLACE the transmission in DRIVE or FIRST GEAR and ATTEMPT to engage the Line Lock feature RELEASE the parking brake and ATTEMPT to engage the Line Lock feature TURN the steering wheel to the straight-ahead position and ATTEMPT to engage the Line Lock feature START the engine and ATTEMPT to engage the Line Lock feature The brake pressure meter in the message center must be completely filled before the Line Lock feature engages. REFER to the appropriate service information for Line Lock feature operation. The Line Lock feature cannot be used with Snow-Wet mode selected. SELECT Track mode and ATTEMPT to engage the Line Lock feature The vehicle cannot be moving when selecting the Line Lock feature. STOP the vehicle and ATTEMPT to engage the Line Lock feature

Possible Source

Action

Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module, PCM and PSCM DTCs
REPAIR and INSTALL the road wheel and ATTEMPT to engage the Line Lock feature
CLOSE the open door and ATTEMPT to engage the Line Lock feature
The transmission must be in a forward gear for the Line Lock feature to engage. PLACE the transmission in DRIVE or FIRST GEAR and ATTEMPT to engage the Line Lock feature
RELEASE the parking brake and ATTEMPT to engage the Line Lock feature
TURN the steering wheel to the straight-ahead position and ATTEMPT to engage the Line Lock feature
START the engine and ATTEMPT to engage the Line Lock feature
The brake pressure meter in the message center must be completely filled before the Line Lock feature engages. REFER to the appropriate service information for Line Lock feature operation.
The Line Lock feature cannot be used with Snow-Wet mode selected. SELECT Track mode and ATTEMPT to engage the Line Lock feature
The vehicle cannot be moving when selecting the Line Lock feature. STOP the vehicle and ATTEMPT to engage the Line Lock feature