Steering Column Control Module (SCCM)

The SCCM is attached to the steering column, behind the steering wheel. The SCCM receives inputs from the following items:

• Multifunction switch
• Pedal adjust switch
• Steering wheel rotation sensor
• Steering wheel switches
• Wiper washer switch

Using the inputs above, the SCCM controls the output directly or transmits the information as messages on either the HS-CAN or the LIN.

The SCCM also provides a "pass-through" circuit path, via the clockspring, for the following components and/or features:

• Driver air bag module
• Horn
• Steering wheel switch illumination

The SCCM monitors all of the inputs it receives and is capable of setting DTCs if a fault is detected.