DTC P0610 - Control Module Vehicle Options Error
DTC DESCRIPTION P0610 - CONTROL MODULE VEHICLE OPTIONS ERROR
| Description: | This DTC sets when a PCM vehicle options error has occurred. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC sets when the PCM detects various VID data that is out of a specified acceptable range. Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a Replacement PCM. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||