LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2020 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Steering Wheel And Column Electrical Components) >> Description And Operation >> Steering Wheel and Column Electrical Components - System Operation and Component Description >> Component Description >> BCM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Description: BCM

WARNING: This page is about a different car, the 2020 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

The BCM controls the run/start relays and sets the vehicle ignition mode based on inputs and communicates the ignition mode to other modules over the CAN. If a fault is detected in the ignition switch system, Diagnostic Trouble Codes (DTCs) are set in the BCM.

The BCM requires at least 2 keys to be programmed, and the PMI and parameter reset procedures carried out when replaced. Additionally, if equipped with a steering column lock module, the BCM to Electronic Steering Column Lock (ESCL) configuration must be carried out.

scientia non olet · About LEMON Manuals