LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2020 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Steering Wheel And Column Electrical Components) >> Description And Operation >> Steering Wheel and Column Electrical Components - System Operation and Component Description >> Network Message Chart - Heated Steering Wheel >> HSWM Network Input Messages
April 5, 2026: LEMON Manuals is launched! Read the announcement.

HSWM Network Input Messages

WARNING: This page is about a different car, the 2020 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Broadcast Message Originating Module Message Purpose
Engine power status PCM This message indicates to the HSWM whether the engine is running.
Ignition status BCM Indicates which ignition mode is active.
Transport mode BCM Message is used to reduce the drain on the battery during long periods when the vehicle is not used, such as shipping from the factory to the dealership.
Steering wheel heat request FCIM Message is used to activate the heated steering wheel function when the touchscreen button is pressed on the FDIM, or when the conditions are met to activate the heated steering wheel (and heated seats) during a remote start.
scientia non olet · About LEMON Manuals