LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2020 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Steering Wheel And Column Electrical Components) >> Removal And Installation >> Steering Column Lock Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column Lock Module: Installation

WARNING: This page is about a different car, the 2020 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Using a diagnostic scan tool, complete the PMI process for the BCM following the on-screen instructions.

  3. NOTE: This step is only necessary when installing a new component.

    Carry out the BCM to steering column lock module training procedure.

  4. NOTE: This step is only necessary when installing a new component.

    Carry out the BCM self-test. Clear the Diagnostic Trouble Codes (DTCs) and then retrieve the Diagnostic Trouble Codes (DTCs) from the BCM to confirm all Diagnostic Trouble Codes (DTCs) have been cleared.

scientia non olet · About LEMON Manuals