APIM DTC Chart
| DTC | Description | Action |
|---|---|---|
| B108E:01 | Display: General Electrical Failure | GO to Pinpoint Test M |
| B108E:02 | Display: General Signal Failure | GO to Pinpoint Test M |
| B108E:4A | Display: Incorrect Component Installed | INSTALL the correct display unit as necessary. REFER to: Front Display Interface Module (FDIM) . |
| B108E:4B | Display: Over Temperature | GO to Pinpoint Test M |
| B108E:87 | Display: Missing Message | GO to Pinpoint Test M |
| B119F:01 | GPS Antenna: General Electrical Failure | For vehicles not
equipped with a satellite radio, GO to Pinpoint Test S For vehicles equipped with a satellite radio, GO to Pinpoint Test T |
| B119F:13 | GPS Antenna: Circuit Open | For vehicles not
equipped with a satellite radio, GO to Pinpoint Test S For vehicles equipped with a satellite radio, GO to Pinpoint Test T |
| B1252:11 | USB Port: Circuit Short To Ground | GO to Pinpoint Test P |
| B1252:13 | USB Port: Circuit Open | GO to Pinpoint Test P |
| B14FD:11 | External Media Control Connectivity: Circuit Short To Ground | GO to Pinpoint Test P |
| B1D79:11 | Microphone Input: Circuit Short To Ground | GO to Pinpoint Test O |
| B1D79:12 | Microphone Input: Circuit Short To Battery | GO to Pinpoint Test O |
| B1D79:13 | Microphone Input: Circuit Open | GO to Pinpoint Test O |
| C1001:01 | Vision System Camera: General Electrical Failure | REFER to: Parking Aid . |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | GO to Pinpoint Test Z |
| U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | GO to Pinpoint Test AA |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test AB |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to Pinpoint Test AC |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test AD |
| U0159:00 | Lost Communication With Parking Assist Control Module "A": No Sub Type Information | GO to Pinpoint Test AE |
| U0162:00 | Lost Communication With Navigation Display Module: No Sub Type Information | GO to Pinpoint Test M |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to Pinpoint Test AF |
| U0198:00 | Lost Communication With Telematic Control Module: No Sub Type Information | GO to Pinpoint Test AG |
| U0208:00 | Lost Communication With "Seat Control Module A": No Sub Type Information | GO to Pinpoint Test AH |
| U020C:00 | Lost Communication with Wireless Accessory Charging Module "A": No Sub Type Information | GO to Pinpoint Test AI |
| U0232:00 | Lost Communication With Side Obstacle Detection Control Module - Left: No Sub Type Information | GO to Pinpoint Test AJ |
| U0233:00 | Lost Communication With Side Obstacle Detection Control Module - Right: No Sub Type Information | GO to Pinpoint Test AK |
| U0238:00 | Lost Communication With Digital Audio Control Module "D": No Sub Type Information | GO to Pinpoint Test AM |
| U023B:00 | Lost Communication With Image Processing Module B: No Sub Type Information | GO to Pinpoint Test AN |
| U0256:00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to Pinpoint Test AP |
| U0415:00 | Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | GO to Pinpoint Test AT |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | GO to Pinpoint Test AT |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information | GO to Pinpoint Test AT |
| U0452:00 | Invalid Data Received From Restraints Control Module: No Sub Type Information | GO to Pinpoint Test AT |
| U1A00:87 | Private Communication Network: Missing Message | GO to Pinpoint Test B |
| U2017:45 | Control Module Software #2: Program Memory Failure | GO to Pinpoint Test AU |
| U2017:51 | Control Module Software #2: Not Programmed | GO to Pinpoint Test AU |
| U2017:52 | Control Module Software #2: Not Activated | GO to Pinpoint Test AU |
| U2017:54 | Control Module Software #2: Missing Calibration | GO to Pinpoint Test AU |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | GO to Pinpoint Test AU |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | GO to Pinpoint Test AU |
| U3000:04 | Control Module: System Internal Failure | GO to Pinpoint Test AV |
| U3000:09 | Control Module: Component Failure | GO to Pinpoint Test AV |
| U3000:41 | Control Module: General Checksum Failure | GO to Pinpoint Test AV |
| U3000:88 | Control Module: Bus Off | GO to Pinpoint Test AS |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AQ |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AR |