| B116C:04 |
External SIM Cable/SIM Card: System Internal Failure |
GO to Pinpoint Test AV |
| B1246:11 |
GSM (Group System for Mobile) Antenna: Circuit Short To Ground |
GO to Pinpoint Test V |
| B1246:13 |
GSM (Group System for Mobile) Antenna: Circuit Open |
GO to Pinpoint Test V |
| B156D:55 |
TCU Customer Connectivity Settings Synchronization With HMI: Not Configured |
GO to Pinpoint Test AU |
| B156D:89 |
TCU Customer Connectivity Settings Synchronization With HMI: ISO/SAE Reserved |
GO to Pinpoint Test AU |
| B1D55:11 |
Antenna #2: Circuit Short To Ground |
GO to Pinpoint Test W |
| B1D55:13 |
Antenna #2: Circuit Open |
GO to Pinpoint Test W |
| U0100:00 |
Lost Communication with ECM/PCM "A": No Sub Type Information |
GO to Pinpoint Test Z |
| U0140:00 |
Lost Communication With Body Control Module: No Sub Type Information |
GO to Pinpoint Test AB |
| U0155:00 |
Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information |
GO to Pinpoint Test AD |
| U0253:00 |
Lost Communication With Accessory Protocol Interface Module: No Sub Type Information |
GO to Pinpoint Test AO |
| U0422:00 |
Invalid Data Received From Body Control Module: No Sub Type Information |
GO to Pinpoint Test AT |
| U0554:00 |
Invalid Data Received From Accessory Protocol Interface Module: No Sub Type Information |
GO to Pinpoint Test AT |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
GO to Pinpoint Test AU |
| U2101:00 |
Control Module Configuration Incompatible: No Sub Type Information |
GO to Pinpoint Test AU |
| U3000:04 |
Control Module: System Internal Failure |
GO to Pinpoint Test AV |
| U3000:41 |
Control Module: General Checksum Failure |
GO to Pinpoint Test AV |
| U3000:42 |
Control Module: General Memory Failure |
GO to Pinpoint Test AV |
| U3000:52 |
Control Module: Not Activated |
GO to Pinpoint Test AV |
| U3000:56 |
Control Module: Invalid / Incompatible Configuration |
GO to Pinpoint Test AV |
| U3003:16 |
Battery Voltage: Circuit Voltage Below Threshold |
GO to Pinpoint Test AQ |
| U3003:17 |
Battery Voltage: Circuit Voltage Above Threshold |
GO to Pinpoint Test AR |