Pinpoint Test D : U1000:00: Notes
WARNING: This page is about a different car, the 2020 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
The BCMB uses solid state drivers to control the output of several vehicle systems. When an overload occurs on any of these drivers, the BCMB disables the output and tracks the number of repetitive faults on each of these circuits. The module compares this number of overloads to 3 progressive thresholds established for each circuit. At each threshold, DTC U1000:00 sets along with the DTC associated with the affected circuit. REFER to: Module Controlled Functions - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U1000:00 | Solid State Driver Protection Active: Driver Disabled: No Sub Type Information | A continuous memory DTC that sets when the BCMB has disabled a circuit due to a repetitive circuit overload and a progressive threshold is met. |
Possible Sources
- BCMB output circuit short
- BCMB