Tire Pressure Monitoring System DTCS: RTM
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| DTC | Description | Action |
|---|---|---|
| U0146:00 | Lost Communication with Gateway "A": No Sub Type Information | GO to Pinpoint Test H |
| U0401:00 | Invalid Data Received from ECM / PCM "A": No Sub Type Information | GO to Pinpoint Test J |
| U0401:82 | Invalid Data Received from ECM / PCM "A": Alive / Sequence Counter Incorrect / Not Updated | GO to Pinpoint Test J |
| U1A00:00 | Private Communication Network: No Sub Type Information | GO to Pinpoint Test I |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC is present when a new RTM is installed, or when the RTM is incorrectly flashed or reconfigured. This DTC clears when the RTM is correctly configured. Using a diagnostic scan tool, CONFIGURE the RTM. FOLLOW all diagnostic scan tool instructions. |
| U3000:04 | Control Module: System Internal Failure | GO to Pinpoint Test I |