Pinpoint Test S : U1000:00: Notes
WARNING: This page is about a different car, the 2020 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.
U1000:00
Normal Operation and Fault Conditions
The BCM uses solid state drivers to control the output of several vehicle systems. When an overload occurs on any of these drivers, the BCM disables the output and tracks the number of repetitive faults on each of these circuits. The module compares this number of overloads to three progressive thresholds established for each circuit. At each threshold, DTC U1000:00 sets along with the DTC associated with the affected circuit.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U1000:00 | Solid State Driver Protection Activated-Driver Disabled: No Sub Type Information | A continuous memory DTC that sets when the BCM disables a circuit due to a repetitive circuit overload and a progressive threshold is met. |
Possible Sources
- BCM output circuit short
- BCM