Jog Mode

If the DSM detects an invalid or no signal from either of the steering column tilt/telescope motor sensors, the affected steering column motor operates only in jog mode. Jog mode allows limited operation of the affected steering column motor only when using the steering column control switch. When the steering column control switch is operated during jog mode, the steering column moves in the desired direction for two seconds and then stops. The steering column control switch must be released, then pressed again in order to move the steering column for an additional second. Jog mode is an indication there is a tilt or telescoping motor sensor or circuit fault. If the adjustable steering column operates in jog mode, a DTC should be set in the DSM.