Pinpoint Test U : Internal Module Failure
- Normal Operation and Fault Conditions
Using a diagnostic scan tool, CLEAR the Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If the Diagnostic Trouble Code (DTC) is retrieved again, INSTALL a new HVAC control module. REFER to the appropriate Removal and Installation procedure in this service information.
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition HVAC U3000:49 Control Module: Internal Electronic Failure Sets when the HVAC control module detects an internal fault. Possible Sources
- HVAC control module
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods