LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> Bronco Base, 2D Utility, 2.3L Eng VIN H, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis (Single Page) >> Transmission >> Transfer Case >> Four-Wheel Drive Systems - Advanced 4X4 With 4A Mode (With Manual Transmission) >> Removal And Installation >> Transfer Case Range Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transfer Case Range Sensor: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the transfer case range sensor connector and detach the wiring harness retainer clip from the transfer case.
    GFD626585Courtesy of FORD MOTOR COMPANY
  2. Remove the transfer case range sensor retainers and remove the transfer case range sensor cover.

    Torque: 106 lb.in (12 Nm)

    GFD626586Courtesy of FORD MOTOR COMPANY
  3. Remove the transfer case range sensor.
GFD626587Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals