Pinpoint Test CN: Abs Module Communication Concern With Sima
Normal Operation and Fault Conditions
The SIMA is also known as the Driveline Chassis Switch (DLCS).
With the ignition ON, the SIMA sends messages to the ABS module over the FD-CAN. If the ABS module does not receive these messages within the allotted time frame or if the messages contain invalid data, the module sets a DTC. This can be due to a SIMA failure, a circuit failure on the network or an excessive load on the network. For information on the messages sent to the ABS module by the SIMA, refer to the Network Message Chart .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| ABS U01B7:00 | Lost Communication with Switch Input Module "A": No Sub Type Information | This DTC sets when the ABS module does not receive any messages from the SIMA within the allowed time. |
Possible Sources
- Network communication concern
- SIMA concern
Pinpoint Tests CN: ABS Module Communication Concern With SIMA