| B1182:00 |
Tire Pressure Monitoring System: No Sub Type Information |
GO to Pinpoint Test A |
| B1182:55 |
Tire Pressure Monitoring System: Not Configured |
GO to Pinpoint Test M |
| B124D:02 |
Tire Pressure Sensor: General Signal Failure |
GO to Pinpoint Test B |
| B1251:00 |
Tire Pressure Sensor Low Battery: No Sub Type Information |
GO to Pinpoint Test C |
| B1254:51 |
Right Rear (Outside on Duel Wheel) Tire Pressure Sensor and Transmitter Assembly: Not Programmed |
GO to Pinpoint Test M |
| B1255:51 |
Left Rear (Outside On Duel Wheel) Tire Pressure Sensor and Transmitter Assembly: Not Programmed |
GO to Pinpoint Test M |
| C1A56:51 |
Left Front Tire Pressure Sensor and Transmitter Assembly: Not Programmed |
GO to Pinpoint Test M |
| C1A58:51 |
Right Front Tire Pressure Sensor and Transmitter Assembly: Not Programmed |
GO to Pinpoint Test M |
| U0559:56 |
Invalid Data Received From Radio Transceiver: Invalid/Incompatible Configuration |
GO to Pinpoint Test K |
| U0146:00 |
Lost Communication With Gateway "A": No Sub Type Information |
GO to Pinpoint Test H |
| U0401:00 |
Invalid Data Received from ECM / PCM "A": No Sub Type Information |
GO to Pinpoint Test J |
| U0401:82 |
Invalid Data Received from ECM / PCM "A": Alive / Sequence Counter Incorrect / Not Updated |
GO to Pinpoint Test J |
| U1A00:00 |
Private Communication Network: No Sub Type Information |
GO to Pinpoint Test I |
| U2016:57 |
Control Module Main Software: Invalid/Incompatible Software Component |
GO to Pinpoint Test L |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
GO to Pinpoint Test K |
| U3000:04 |
Control Module: System Internal Failures |
GO to Pinpoint Test K |