P0610 - Control Module Vehicle Options Error
DTC DESCRIPTION P0610 - CONTROL MODULE VEHICLE OPTIONS ERROR
| Description: | This DTC sets when one or more of the PCM VID Block fields were configured incorrectly. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Check for aftermarket performance products. If it is necessary to install a new PCM, refer to Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Programming the VID Block for a replacement PCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test QA. | ||