LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> Edge ST-Line, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Climate Control System - General Information) >> Removal And Installation >> Condenser >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Condenser: Installation

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Install new O-ring seals.

    Material: Motorcraft ® PAG Refrigerant Compressor Oil / YN-12-D (WSH-M1C231-B)

  3. Lubricate the refrigerant system with the correct amount of clean PAG oil. Refer to: Refrigerant Oil Adding .
scientia non olet · About LEMON Manuals