P24BA - EVAP System Leak Detection Pump Pressure Sensor Circuit Low

DTC DESCRIPTION P24BA - EVAP SYSTEM LEAK DETECTION PUMP PRESSURE SENSOR CIRCUIT LOW

Description:	This DTC sets when the evaporative emission (EVAP) leak detection control module pressure sensor signal is less than a minimum allowable calibrated parameter.
Possible Causes:	EVAPLDPPR circuit open EVAPLDPPR circuit short to ground EVAPLDPPR circuit short to SIGRTN VREF circuit open Damaged EVAP leak detection control module
Diagnostic Aids:
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to Pinpoint Test HX.