P0606 - Control Module Processor
DTC DESCRIPTION P0606 - CONTROL MODULE PROCESSOR
| Description: | This DTC sets when there is an internal PCM communication error. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Reprogram or update the calibration. Check for other DTCs and diagnose those first. Check for aftermarket performance products. Clear the DTCs, repeat the self-test. If the DTC is retrieved again, install a new PCM. Refer to Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Programming the VID Block for a Replacement PCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test QA. | ||