P160A - Control Module Vehicle Options Reconfiguration Error
DTC DESCRIPTION P160A - CONTROL MODULE VEHICLE OPTIONS RECONFIGURATION ERROR
| Description: | This DTC sets when the body control module (BCM) detects a mismatch in configuration data and programmable parameters between the PCM and BCM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Reprogram or update the calibration. If the PCM already has the latest calibration, carry out the relearn vehicle data procedure on the scan tool. Check for other DTCs or drive symptoms for further action. Check for aftermarket performance products. If it is necessary to install a new PCM, refer to Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Programming The Vid Block For A Replacement PCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test QA. | ||