LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Powertrain DTC Charts & Descriptions (Diesel)) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> DTC P264F - Engine Serial Number Not Programmed Or Incompatible
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P264F - Engine Serial Number Not Programmed Or Incompatible

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, 2018 Ford Transit-150, and 2018 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
P264F - ENGINE SERIAL NUMBER NOT PROGRAMMED OR INCOMPATIBLE

Description:  This DTC sets when the PCM does not receive a valid engine serial number during reprogramming.
Possible Causes: 
  • Engine serial number corrupted during vehicle identification (VID) reprogramming
  • PCM replacement
  • Damaged PCM
Diagnostic Aids:  The VID block must be programmed. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming VID Block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.
scientia non olet · About LEMON Manuals