LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Controls - Pinpoint Tests (Diesel)) >> Pinpoint Tests F: Intake Air Temperature (IAT) Sensor >> Introduction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Tests F: Intake Air Temperature (IAT) Sensor: Introduction

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, 2018 Ford Transit-150, and 2018 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Regeneration may occur during normal operation. During regeneration, diagnostic procedures may display biased values. If a regeneration occurs during diagnostic procedures, allow the process to complete before continuing diagnostics.

This pinpoint test is intended to diagnose the following:

Fig 1: Mass Airflow/Intake Air Temperature (MAF/IAT) Sensor Connector
G07432169Courtesy of FORD MOTOR CO.
Pin Circuit
4 SIGRTN (Signal Return)
2 IAT (Intake Air Temperature)
Fig 2: Powertrain Control Module-B (PCM-B) Connector
G07432312Courtesy of FORD MOTOR CO.
Pin Circuit
60 SIGRTN (Signal Return)
47 IAT (Intake Air Temperature)
Fig 3: Powertrain Control Module-T (PCM-T) Connector
G10769132Courtesy of FORD MOTOR CO.
Pin Circuit
15 SIGRTN (Signal Return)
9 IAT (Intake Air Temperature)