Powertrain Control Software: Multiplexing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, 2018 Ford Transit-150, and 2018 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Multiplexing is the process of communicating several messages over the same signal path. This process allows multiple modules to communicate with each other through the signal path controller area network (CAN). Modules communicate with the PCM using CAN communications, to determine the priority in which the signals are sent. For additional information, refer to CONTROLLER AREA NETWORK (CAN) .