Powertrain Drivetrain Mount Neutralizing

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations, refer to OEM COLOR CODING

Powertrain/Drivetrain Mount Neutralizing

Adjustment

NOTE: Refer to the appropriate article and procedure for special instructions on loosening and tightening mount fasteners.

Refer to: Jacking and Lifting - Overview .
Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
Lower the vehicle.
NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.
Refer to: Jacking and Lifting - Overview .
Tighten the powertrain/drivetrain mount fasteners.
Lower the vehicle.
Test the system for normal operation.