Hood Alignment

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations, refer to OEM COLOR CODING

Inspection

Inspect the hood-to-body dimensions. Refer to: Body and Frame .

Courtesy of FORD MOTOR COMPANY

All alignments
Open the hood.

Courtesy of FORD MOTOR COMPANY
Remove the hood latch. Refer to: Hood Latch .
Hood fore and aft, left and right alignments
NOTE: Support the hood before removing the strut. Failure to follow this direction may result in damage to the components.

Remove the struts.

Courtesy of FORD MOTOR COMPANY
Loosen the nuts enough to permit movement of the hood.

Courtesy of FORD MOTOR COMPANY
Carefully close the hood.

Courtesy of FORD MOTOR COMPANY
Adjust the hood to specification. Refer to: Body and Frame .

Courtesy of FORD MOTOR COMPANY
NOTE: Support the hood before removing the strut. Failure to follow this direction may result in damage to the components.

Carefully open and support the hood.

Courtesy of FORD MOTOR COMPANY
Tighten the nuts.
Torque: 22 lb.ft (30 Nm)

Courtesy of FORD MOTOR COMPANY
Install the struts.

Courtesy of FORD MOTOR COMPANY

Hood front up and down alignments
Adjust the bump stop rubbers.

Courtesy of FORD MOTOR COMPANY
Close the hood.

Courtesy of FORD MOTOR COMPANY
Adjust the hood to specification. Refer to: Body and Frame .

Courtesy of FORD MOTOR COMPANY

All alignments
Inspect the body-to-hood dimensions. Refer to: Body and Frame .

Courtesy of FORD MOTOR COMPANY
Install the removed components.