Handles, Locks, Latches and Entry Systems - System Operation and Component Description: Autolock

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

The autolock feature locks all of the doors after all of the following have occurred:

All the doors are closed.
The ignition is on.
The vehicle is shifted into any gear to put the vehicle in motion.
The vehicle attains a speed greater than 20 km/h (12.4 mph).

The autolock feature activates again during the same ignition cycle when all of the following have occurred:

The vehicle speed is reduced to less than 15 km/h (9.3 mph).
A door is opened and then closed.
The vehicle attains a speed greater than 20 km/h (12.4 mph).

To enable/disable the autolock feature, enter TOOLBOX. Select Module Programming>Programmable Parameters>Power Door Locks. Change all of the settings to Enable or Disable as needed.