Push Button Ignition Switch: On

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

The BCM must recognize a programmed key before it changes the ignition mode out of OFF. When the START/STOP button is pressed when the ignition is off, the BCM checks the vehicle for a valid programmed key as part of the PATS function. If no valid programmed key is detected, the ignition remains off. Refer to: Passive Anti-Theft System (PATS) - System Operation and Component Description .

When the ignition is in the ON mode, the BCM activates the run/start relay to provide voltage to the vehicle electrical systems and communicates the ignition mode to the other modules by sending an ignition status message over the CAN.

When the vehicle enters ON mode, multiple indicators in the IPC prove out and the IPC displays the gear selection and the vehicle mileage.