P0130 - O2 Sensor Circuit (Bank 1 Sensor 1)
DTC DESCRIPTION P0130 - O2 SENSOR CIRCUIT (BANK 1 SENSOR 1)
| Description: |
This DTC sets when a concern is detected with one of the circuits used to determine the oxygen content in the exhaust gas. |
| Possible Causes: |
- UO2S11 circuit open (if equipped)
- UO2S11 circuit short to ground (if equipped)
- UO2S11 circuit short to voltage (if equipped)
- UO2SGREF11 circuit open (if equipped)
- UO2SGREF11 circuit short to ground (if equipped)
- UO2SGREF11 circuit short to voltage (if equipped)
- UO2SPC11 circuit short to ground (if equipped)
- UO2SPC11 circuit short to voltage (if equipped)
- UO2SPCT11 circuit short to ground (if equipped)
- UO2SPCT11 circuit short to voltage (if equipped)
- HO2S11 circuit open (if equipped)
- HO2S11 circuit short to ground (if equipped)
- HO2S11 circuit short to voltage (if equipped)
- Incorrect connections
- Damaged or corroded pins
- Exhaust temperature significantly higher than expected
- Damaged universal heated oxygen sensor bank 1, sensor 1 (HO2S11) (if equipped)
- Damaged HO2S11 (if equipped)
|
| Diagnostic Aids: |
Inspect the connectors for signs of damage, water intrusion or corrosion. |
| Application |
Key On Engine Off |
Key On Engine Running |
Continuous Memory |
| EcoSport 1.5L, KA |
GO to Pinpoint Test DW. |
| All others |
GO to Pinpoint Test DZ. |