Fuel Pump Control - ERFS: Notes
NOTE:
The Mustang 5.2L engines uses 2 fuel pump control modules to control fuel for the fuel delivery system. The PCM sends one FP duty cycle on the FPC circuit. Both fuel pump control modules use this circuit.
The FP signal is a duty cycle command sent from the PCM to the fuel pump control modules. The fuel pump control modules use the FP command to operate the fuel pumps at the speed requested by the PCM or to turn the pumps OFF. When the ignition is turned ON, the electric fuel pumps run for about 1 second and are requested OFF by the PCM if engine rotation is not detected.