Pinpoint Test B : Engine Does Not Crank - With Push-Button Start: Notes
WARNING: This page is about a different car, the 2019 Ford F-350 Super Duty and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Starting System for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Starting System - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P06E9 | Engine Starter Performance | The PCM sets this DTC when no engine rotation is detected during a crank event. |
| P0830:11 | Clutch Pedal Switch "A" Circuit: Circuit Short To Ground | The BCM sets this DTC when a short to ground is detected on the clutch bottom of travel circuit during an on-demand self test. |
Possible Sources
- Battery
- Battery cables
- IPC
- Starter motor
- BJB starter relay
Visual Inspection and Diagnostic Pre-checks
- Inspect the run/start relay.
- Inspect the high current BJB connections.
- Verify the BJB fuse 63 (30A).
- Inspect the passive key.
- Inspect the CPP switch.