Pinpoint Test E : P2535 (Without Push Button Start): Notes
WARNING: This page is about a different car, the 2019 Ford F-350 Super Duty and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Starting System for schematic and connector information.
Normal Operation and Fault Conditions
When the ignition is turned to the START position the PCM receives a voltage signal on the crank detect circuit. The PCM then supplies voltage and ground to the starter relay coil when the required inputs have been received.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P2535 | Ignition Switch Run/Start Position Circuit High | This DTC sets when the PCM detects voltage on the crank detect circuit while the engine is running. |
Possible Sources
- BCM
- Ignition switch
- PCM
- Wiring, terminals or connectors