For All Others
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, 2018 Ford Transit-150, and 2018 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Crankshaft Position Sensor
- EGR Throttle
- Fuel System - High Pressure Side
- Fuel System - Low Pressure Side
- Initialize Selective Catalytic Reductant (SCR) Learning
- MAF Sensor
- Min. Fuel Mass Adaptation - All Cylinders
- Nitrogen Oxide Sensor 1
- Nitrogen Oxide Sensor 2
- Oil Service Counters
- Oxidation Catalyst
- Particulate Filter
- Particulate Filter Differential Pressure Sensor
- Reset Automatic Regeneration Control Tracking Information
- Reset Minimum Fuel Mass Adaptions For Cylinder 1
- Reset Minimum Fuel Mass Adaptions For Cylinder 2
- Reset Minimum Fuel Mass Adaptions For Cylinder 3
- Reset Minimum Fuel Mass Adaptions For Cylinder 4
- Reset Minimum Fuel Mass Adaptions For Cylinder 5
- Reset Minimum Fuel Mass Adaptions For Cylinder 6
- Reset Minimum Fuel Mass Adaptions For Cylinder 7
- Reset Minimum Fuel Mass Adaptions For Cylinder 8
- Reset Oxygen Sensor Learned Values
- Reset Particulate Matter Sensor Learned Values
- Reset Selective Catalytic Reduction (SCR) Inducement Fault Chain
- Reset Turbocharger/Supercharger A Compressor Coking Protection Strategy
- Reset Turbocharger/Supercharger B Compressor Coking Protection Strategy
- Water In Fuel Counter
After resetting and clearing the specified functions, the vehicle may exhibit certain driveability concerns. It is necessary to drive the vehicle to allow the PCM to relearn the values for optimum driveability and performance.
The clear function for the PCM adaptive tables may not be supported by all scan tools. Refer to the scan tool manufacturers manual for instructions on the scan tool setup, operation, and specific cables and adapters required.