Drive Cycles: Overview
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, 2018 Ford Transit-150, and 2018 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Strict observance of posted speed limits and attention to driving conditions are mandatory when proceeding through the drive cycle.
NOTE:
Not all PIDs are available on all vehicles. Use the module selection in datalogger to access all available PIDs for the module.
NOTE:
Vehicles equipped with power take off (PTO) or auxiliary idle control must have that system disengaged before the drive cycle is initiated.
The Drive Cycle Procedure is carried out to satisfy the specifications for the Society of Automotive Engineers (SAE) specification J1979. Each on board diagnostic (OBD) monitor must run during the drive cycle.