Component Description: PDM

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

For the power window function, the PDM receives power window commands from the passenger door window control switch or from the DDM through the MS-CAN.

For the power mirror function, the PDM controls the RH exterior mirror glass position by supplying voltage and ground to the RH exterior mirror motors based on messages received from the DDM. To control the heated mirror function, the PDM supplies voltage and ground to the RH exterior mirror glass heating element based on messages received from the FCIM. For the memory mirror function, the PDM supplies voltage and ground to the RH mirror motor potentiometers. The PDM monitors the feedback from these potentiometers to determine the mirror glass position. Passenger mirror positions are stored in the PDM memory. For more information:

Refer to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .
Refer to: Glass, Frames and Mechanisms - System Operation and Component Description .
Refer to: Rear View Mirrors - System Operation and Component Description .

The PDM requires PMI when replaced.

Refer to: MODULE CONFIGURATION . .