Accumulating Powertrain Control Module (PCM) Data
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2022 Ford F-550 Super Duty, 2022 Ford F-450 Super Duty, 2022 Ford F-350 Super Duty, 2022 Ford F-250 Super Duty, and 2021 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
The PCM data can be accumulated in a number of ways. Gather as much data as possible when the concern is occurring to prevent misdiagnosis. Accumulate data during different operating conditions and based on the customer description of the intermittent concern. Reference the known good data values, Refer to TYPICAL DIAGNOSTIC REFERENCE VALUES . This requires recording data in 4 conditions for comparison: 1) Key On Engine Off (KOEO), 2) Hot Idle, 3) 48 km/h (30 mph), and 4) 89 km/h (55 mph). Acquisition of PCM PID data using a scan tool is one of the easiest ways to gather information.
For information on the functions of your scan tool, refer to the scan tool manufacturers manual for instructions.
Below is a list of the functions available:
- selecting and viewing PIDs
- storing PIDs
- recording measurements along with PIDs
- playback of stored PIDs
- peripheral inputs