Factory Keycode Retrieval
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
The factory keycode for the keyless entry keypad can be retrieved from a label on the BCM, a wallet card in the Owner's Literature, using a diagnostic scan tool, or by using 2 valid programmed keys.
To retrieve the factory keycode using 2 valid programmed keys, carry out the following steps within 10 seconds:
- Place the first valid programmed key into the ignition lock cylinder or backup starting location and turn the ignition on.
- Turn the ignition off and remove the first valid programmed key.
- Place the second valid programmed key into the ignition lock cylinder or backup location and turn the ignition on.
NOTE:
Any warning messages that may be present are displayed in the message center prior to the keycode being displayed.
The factory keycode displays momentarily in the message center.