Powertrain/Drivetrain Mount Neutralizing

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING INFORMATION

Adjustment

NOTE: Refer to the appropriate information and procedure for special instructions on loosening and tightening mount fasteners.

With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
Lower the vehicle.
NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.
Raise and support the vehicle.
Tighten the powertrain/drivetrain mount fasteners.
Lower the vehicle.
Test the system for normal operation.