P06D1 - Internal Control Module Ignition Coil Control Module Performance
DTC DESCRIPTION P06D1 - INTERNAL CONTROL MODULE IGNITION COIL CONTROL MODULE PERFORMANCE
| Description: | This DTC sets when the PCM has detected an error with the ignition coil driver and diagnostic circuit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check for other DTCs and diagnose those first. Check for aftermarket performance products. If an updated calibration is available, update the calibration to the latest level. If an updated calibration is not available, clear the DTCs and repeat the self-test. If the DTC is retrieved again, install a new PCM. Refer to Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Programming The Vid Block For A Replacement PCM. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test JF. | ||