Image Processing Module A (IPMA): Removal
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- If a new IPMA is being installed, using a diagnostic scan tool, begin the PMI process for the IPMA following the on-screen instructions.
- Disconnect the trailer tow lighting module electrical connectors.
- Remove the bolts and trailer tow lighting module.
Torque
: 106 lb.in (12 Nm)
- Disconnect the IPMA electrical connectors.
- Remove the bolts and IPMA
Torque
: 53 lb.in (6 Nm)