DTC B1016: Status Switch: Action
WARNING: This page is about a different car, the 2019 Lincoln Nautilus. However, it is still accessible from the selected car via links, so may be relevant.
This DTC sets if the SASM logic power circuit current is greater than 1.5A and less than 2.0A for at least 1 second or the current is greater than 2.0A for less than 1 second. CARRY OUT the SASM Module Reset routine. CYCLE the ignition from ON to OFF and back to ON. CLEAR the DTC and CARRY OUT the SASM self-test. If the DTC returns, INSTALL a new SASM - clockspring assembly. REFER to Supplemental Restraint System article.