General Specifications
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Specification |
| Drive pinion flange runout |
0.25 mm (0.010 in) |
| Maximum allowable driveshaft runout |
0.50 mm (0.020 in) |
| Maximum allowable driveshaft runout |
0.65 mm (0.025 in) |
| Maximum allowable driveshaft runout |
0.60 mm (0.023 in) |
| U-joint operating angle range |
0.5°-3.5° |
| U-joint maximum operating angle |
3.5° |
| Front driveshaft runout |
0.76 mm (0.029 in) |